Spray Booth Coating - 4L

Spray Booth Coating - 4LProtection for paint spray booths. A clear protective coating sprayed onto booth walls etc to protect against overspray. Can be washed off with water without the use ofharsh cleaners or solvents. Usually 2 x 4lt is needed for a standard spray booth. Directions: Apply using a conventional spray gun with the pressure set at approximately 275 kPa (40 PSI). Apply 2 coats allowing the film to touch dry between coats. Apply in a uniform fashion with

1L BRUNOX® EPOXY Anticorrosion SystemWHAT DOES IT DO

Velcro Backing

heel dolly

while allowing you to add cone filters / paint strainers on top and pour into the gun pot

Designed for use on Medium Solids (MS)

5mmIdeal for touching up small stone chips or removing particles from paint

Safe for all automotive finishes including enamel

5L High Gloss 2K Premier Lime Car PaintThis product consists of - 4L 2K 4:1 Premier Lime Bright green1L 2K HardenerThis Bright Green mix will give you a nice direct gloss finish straight of the gun - see attached photo of the paint in the tin

The coat displays sound-proofing and sound-dampening properties

Conforms to EN 14594:2005 Class 3AZone classifications: Suitable for use in Zones 1 and 2 hazardous areas (gas groups llA)We recommend that all breathing air supplied to an air fed mask must be passed through a 2 or 3 stage filter to remove oil vapor and the contaminated water in compressed air

This kit includes:1 x Stud Welder Gun1 x Multi-function Slide Hammer200 x 2

Made from high Carbon alloy steel precision ground and sharpened to a razor edge