Z34 370Z car specific handbrake

Z34 370Z car specific handbrakeWhen installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets. The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic handbrake assembly without modifications to the gearbox tunnel. 100% direct fit with no modifications required to the gearbox tunnel Available for either center

if you have our hidden handbrake or budget hydraulic handbrake with the lever mounted horizontally then you would select the behind shifter variant

improving handling and safety

as the inlet and outlet ports are 10MM X 1 bubble flare seats and do not require tube nut adapters to directly install tubing with bubble flare 10MM x 1 nuts

Note: Will not work with an OEM master cylinder

F8X M2/M3/M4 Adjustable Front lower trailing arms (pair) (SKU = F8XX-FLTA)

the greater the chance that the toe arm mount will come close to hitting

This listing is for a replacement clevis used across the following product SKUS:

We also use our high misalignment rose/ heim joints to allow the arm to rotate freely

The feedback that the stock steering rack provides to the driver can sometimes be a bit unpredictable

Z33/350z Toe arms (SKU=350Z-TOEX)

V1 Rear LCA's (note that some used the COM10T)

Z33 350Z on car adjustable front lower control arms (SKU = 350Z-FLNK)