Bare, Shaker End Panel with OGEE Mouldings

Bare, Shaker End Panel with OGEE MouldingsDescription Material Colour Matching Ogee moulding to reveals. Stile and Rail width is 70mm x 22mm thick, leaving a panel thickness of 9mm. Base rail is designed to run inline with the top of the adjacent door rail. CNC produced from a single slab of high density, moisture resistant, highest quality MDF. These end panels dont have any joints to move or crack. Colour matched, spray finished to any mainstream paint supplier's colour. Let us know the

GRASS TIOMOS

Primer is sanded to perfection prior to top coat

These doors don’t have any joints to move or crack

22m thick Flat panel J groove finger pull

Let us know the main colour and the insert colour you would like in the entry box above

Please contact us for any bespoke size or section size requirement

Ogee mouldings to reveals

Supplied bare and sanded ready for your chosen paint system

Stile and Rail width is 10mm on the front and 70mm on the back x 22mm thick

Doors are supplied with two coats of primer ready for final sanding prior to top coat

Small samples available to send out for your approval

Base rail is designed to run inline with the top of the adjacent door rail