S13 Silvia / 180sx Under Engine Bash Plate

S13 Silvia / 180sx Under Engine Bash PlateSave your sump and K frame with this under engine bash plate. This is designed with low cars in mind and will reduce the risk of damage. It will also help reduce turbulence and improve airflow. 3. 0mm thick aluminium 100% perfect fitment Fits S13 Silvia and 180SX

- Replacement for Nissan OEM part number - 32861H7301

The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind

The GKTECH V2 S14/S15subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most

- 60mm long studs

- Stronger than the factory overflow bottle

Want to install an aftermarket coolant temp sensor but don't want to cut into your radiator hose

they are by far the cheapest way of getting both roll centre correction and lock

0mm thick aluminium

Used for extra reliability at high RPM in SR engines

Great for drift or even general street use

From under the rear bumper the diff cover will stand out quite a bit

NOTE#2: If you're are intending on running the rear LCA's any shorter than around -5mm please ensure that your suspension arms have adequate inward adjustment