2.75" to 2.5" ID

2.75" to 2.5" IDThis 45 degree silicone elbow is 2 3 4" ID on one end and 2 1 2" ID on the other and can be used anyplace you need a reducing 45 degree bend. Handles 350 F continuous and is perfect for intercooler aftercooler and turbocharger applications. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" wall construction. Full 6" leg lengths. Recommended clamps are 94100 0288 on the small end and

This 90 degree silicone elbow is 2" ID and can be used in air intake systems and charge air cooler systems operating at 350F or less

This 4" ID to 3" ID silicone reducing coupler is 3 inches long and has the special matte red finish indicating aramid reinforcement

90HL60R55TR

This constant-torque clamp can be used on all types of 8" ID intake hoses

Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) – may have minor defects and small scratches

This reducing 68-degree intake elbow can be used any place where you are connecting a 7" OD tube and a 6" OD tube

especially if you have had trouble with the hose coming off

For version with anti-rattle nub

75" ID (4-ply) silicone hoses

6" Leg lengths

25" MAFs and throttle bodies

and can last longer than other brands