2.75" OD X 12" Long

2.75" OD X 12" LongStandard aluminum intake tubing. 6063T52 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.

Cuts easily with a hack saw

It is recommended in any air-to-air application or any application using silicone hoses

and screw on the locknut to capture the first few threads

Handles 350 F continuous and is perfect for intercooler/aftercooler applications

Inches A 3

The tight radius is useful if you need to clear a nearby obstruction

or to connect a 10" intake tube to an air cleaner

This reducing hump hose connects 5-1/2" OD and 5" OD intake tubes

This reducing insert adapts a 7" ID intake hose to a 6-5/8" OD pipe

This reducing 90-degree intake elbow can be used where you are connecting a 3" OD tube and a 2-1/2" OD tube

This standard 3" 90-degree intake hose can be used where have two 3" OD tubes and you need to make a 90-degree bend

Recommended clamps are 94100-0600 on the small end and 94100-0850 on the big end